rubber foam
英 [ˈrʌbə(r) fəʊm]
美 [ˈrʌbər foʊm]
网络 泡沫橡胶; 橡胶发泡; 橡胶泡沫; 橡胶发泡体; 橡胶海绵
双语例句
- Effects of foaming agent, vulcanizer and the match of the two on the compress stress relaxation of the silicone rubber foam were studied.
研究了氧化锌晶须对硅橡胶混炼胶塑性值、硅橡胶泡沫泡孔结构及分布和泡沫压（缩）应力松弛性能的影响。 - The effects of silicone oil content, silicone dioxide content and inert fillers content on the mechanical properties of silicone rubber foam were studied.
同时研究了结构化控制剂、白炭黑、无机成孔剂的用量等因素对泡沫硅橡胶力学性能的影响。 - Study on the effects of multi-factor accelerating ageing on the mechanical properties of the silicone rubber foam materials
多因素加速老化对硅橡胶泡沫材料力学性能的影响研究 - Rubber foam insulation material is by our company introduces foreign advanced technology, using automatic production lines of environmental protection products.
橡胶发泡保温材料是由我公司引进国外最先进技术，采用全自动生产线生产的环保型产品。 - Rubber insulation material foam production equipment including stoves, extruder, mixer and open chain machines.
橡塑保温材料的生产设备主要包括发泡炉、挤出机、密炼机和开炼机等设备。 - Study on the Preparation Technology and Application of Natural Rubber Foam Composites
天然橡胶发泡复合材料的制备工艺与应用研究 - Study on mechanical properties of silicone rubber foam with different pore structure
不同孔隙结构的硅海绵材料及其力学性能研究 - The silicone rubber foam has excellent properties about cushion and energy absorbering.
泡沫硅橡胶在缓冲减振方面有独特的优良性能。 - The tests data showed that the deformation set of the silicone rubber foam materials increased with the severer condition.
结果表明，硅橡胶泡沫材料的永久变形量随着老化条件严酷程度的增加而增加。 - Study on the application of form-pore agent in making silicone rubber foam
物理成孔剂在硅泡沫制备中的应用研究 - Effects of the Pore Structure of Silicone Rubber Foam on the Mechanical Properties
硅橡胶海绵材料孔隙结构对力学性能的影响 - The tensile strength, tensile modulus and the elongation at break of silicone rubber foam increase with the irradiation dose.
硅橡胶泡沫的拉伸强度随白炭黑含量增加而增加，其压缩永久变形随白炭黑含量的增加逐渐减小。 - The application mechanism of foaming rubber used in winter tyre surface and the mechanism of improving friction of tyre with foaming rubber were studied. The influences of the cell structure of the rubber foam on tensile property, dynamic mechanics and frictional characteristics were also discussed.
研究了发泡橡胶在冬季轮胎胎面中的应用机理和发泡橡胶提高轮胎/冰面摩擦力的机理，以及发泡橡胶的微孔结构对拉伸性能、动态力学性能和摩擦性的影响。 - Study of Preparation and Mechanical Properties of Open Cell Silicone Rubber Foam
开孔型泡沫硅橡胶材料的制备及力学性能研究 - Study on reinforcement mechanism of short fiber/ rubber foam composite
短纤维对橡胶发泡复合材料增强机理的细观分析 - The morphology and structure of the silicone rubber/ EPDM foam were studied by SEM and laser focusing microscope and its tensile strength, compression property and damping characteristics were also investigated.
分别采用电镜和激光共聚焦显微镜研究了硅橡胶/EPDM泡沫合金的结构均匀性和泡孔结构，并进行强伸性能、压缩性能和阻尼减震性能的研究。 - The results showed that the honeycomb laminates had an interlinking open cell structure without remarkable interface between silicone rubber and silicone rubber foam;
结果表明：蜂窝结构硅橡胶泡沫材料内部为大小不等但相互连通的开孔网络结构，泡沫与硅橡胶之间无明显界面； - Study on the low-compression-stress-relaxation silicone rubber foam using the pure chemical foaming technology
纯化学发泡技术在低压缩应力松弛硅橡胶泡沫材料研制中的应用研究 - The application of the orthogonal design test on the silicone rubber/ EPDM blend foam
正交试验方法在硅橡胶/EPDM泡沫中的研究 - Effect of Porosity on Properties of Open Cell Silicone Rubber Foam Materials
孔隙度对开孔硅橡胶泡沫材料性能的影响 - It was found through the analysis based on Gibson and Ashbys theories that the tensile strength of silicone rubber foam decreased and its compression property changed little as the porosity increased.
根据Gibson和Ashbys理论分析，随着孔隙度提高，硅橡胶泡沫材料的拉伸性能降低，而压缩性能变化不大。 - Experimental study of dynamic mechanical behaviors of silicone rubber foam
泡沫硅橡胶动态力学性能的实验研究 - Finally, the analysis of SEM proved that when the system of foamer H/ urea derivative/ ZnO was applied, a relatively ideal silicone rubber foam could be achieved.
SEM电镜分析表明，当发泡剂H与氧化锌配合尿素衍生物并用时，可得到较理想的硅橡胶海绵。 - Mooney-Rivlin model for extension behaviour of rubber foam
Mooney-Rivlin模型对发泡橡胶力学行为的模拟 - Study on structure and properties of silicone rubber/ EPDM blend foam
硅橡胶/EPDM泡沫合金材料的结构与性能 - Microstructure and tensile failure mechanism of short fibre/ rubber foam composite
短纤维/橡胶发泡复合材料的微观结构及拉伸破坏机理 - Effective factors on curing characteristics of silicone rubber foam
发泡硅橡胶胶料硫化特性影响因素的探讨 - Analysis of vulcanization characteristics for silicone rubber foam
硅橡胶泡沫材料硫化特性分析 - The aluminium foam containing silicate rubber was fabricated by infiltrating silicate rubber into open-cell aluminium foam. And the compressive experiments under different strain rate were conducted on the material.
采用向开孔泡沫铝中填入硅橡胶的方法制备出了含硅橡胶泡沫铝，并对其进行了不同应变率条件下的压缩实验。